Technical quote

Data sheets, drawings and the catalogue

Data sheets, the dimensioned drawing we build the cyclone booth from, and the catalogue. Sizing questions are answered on the sizing guide.

Data sheets

One data sheet per product with the standard size and the values that change per project. Data sheets are sent as PDF with every proposal and published here as they are finalised.

Cyclone manual powder coating boothDrawing availableCartridge-filter powder coating boothSent with the proposalAutomatic and robotic powder coating boothSent with the proposalPaper-filter liquid paint boothSent with the proposalDry-filter liquid paint boothSent with the proposalWater-curtain liquid paint boothSent with the proposalBox-type powder curing ovenSent with the proposalTunnel drying and curing ovenSent with the proposalU-turn ovenSent with the proposalSpray washing lineSent with the proposalDip pretreatment tanksSent with the proposalTunnel washerSent with the proposalCardan chain conveyorSent with the proposalTurnkey powder coating plantSent with the proposalPlant relocationSent with the proposal

Dimensioned drawings

The drawing is the one our workshop builds from: front and side views with the dimensions in millimetres. Drawings for ovens and tunnels follow the same convention and are supplied with the proposal.

Product page
Cyclone powder coating booth, dimensioned drawing, front and side views
Cyclone powder coating booth, front and side views, dimensions in mm

Catalogue

A printed and PDF catalogue covering the five product lines is in preparation.

In preparationRequest a printed catalogue

Sizing questions

How booths, ovens, pretreatment and conveyors are sized, with worked examples, and the questions we answer before every quote.

Sizing guideRules, examples, FAQNew, used or localThree routes compared

Values that are not on the sheet

Send your question with the part size; the answer comes from the engineer who sizes the equipment.

Ask a technical question+90 216 599 19 69